Concrete additive | New Graphene Site

ADDITIVES

FOR CONCRETE

NANOTECHNOLOGICAL ADDITIVE FOR CONCRETE WITH CONSTRUCTION X OXIDE

Cutting-edge nanotechnological additive for concrete reinforced with Construction X oxide, with specialized formulation to enhance multiple properties of concrete and mortar.

TECHNICAL DATA SHEET

SAFETY DATA SHEET

CONTACT US AND LET OUR EXPERTS HELP YOU

Since 2018, Construction X® has focused on the development of a multipurpose additive with Construction X oxide to improve various properties of concrete and mortar using a single additive.

Improved

waterproofing

Anticorrosive

protection

Increased

mechanical

strength

Enhanced

flexibility

Thermal

insulation

Accelerates

setting time

Antimicrobial

protection

*Results endorsed by tests in a certified laboratory.

USES

For the manufacturing of any cement-based structure such as mortar and concrete, whether conventional or structural, high-strength concrete, and polymer-based lightweight concrete.

WHO USES IT?

Concrete producers, cement manufacturers, furniture, figurine, and concrete flooring manufacturers, as well as producers of prefabricated elements (blocks, beams, panels, pipes, bridge structures, culverts, etc.)

PACKAGING

1L bottle, 5L jug, and 20L drum

YIELD

– 1 liter of additive covers 4 tons of cement.
– 5 liters of additive cover 20 tons of cement.
– 20 liters of additive cover 80 tons of cement.

SHAKE BEFORE USE

Since the additive is mixed in water, the containers should be well shaken before use. The recommended shaking before use is solely to ensure proper homogeneity of the product, as depending on conditions such as storage time, method, or environmental situations, sedimentation of the active material may occur.

Shaking does not require special equipment or devices. Simply manually shaking the original container in 1L, 5L, or 20L presentation for a couple of minutes is sufficient.

Ultrasonic dispersion or mixing can also be used if the user has the equipment. In this case, depending on the volume, ultrasonication time can vary from 5 to 30 minutes.

DOSAGE

Step 1: Once the additive has been properly shaken, the dosage requirements should be determined based on the dosage calculation:

Dosage Calculation:

Quantity per-kg of cement 0.25 – 1.0 ml
Quantity per-lb of cement 0.008 – 0.033 oz.

Step 2: Disperse the required volume of Construction X Construction in 100 to 1000 ml of the water needed for the concrete or mortar mixture.

Step 3: Prepare the mixture conventionally according to your specifications, considering water, aggregates, cement, and other additives used in the concrete or mortar design.

Step 4: Once the concrete or mortar mixture is prepared and hydrated, in the final mixing stage, incorporate the water with the pre-diluted additive and mix thoroughly for a minimum of 10 minutes.

Note:
The dosage calculation was made based on standard designs and should be considered as a reference only. It is essential to note that the performance of the additive may vary depending on the concrete design, aggregate quality, cement type, use of other additives, and proper mixture homogenization. It is the user’s responsibility to conduct relevant tests with the additive to determine its suitability and correct dosage before final application.